1. Crestron
  2. Повідомлення
Розширений Теми Повідомлення Опитування
Дата
Re: BLUE STAR CASSETTE AC IR Learn issue

 

i tried this all methods and no hex code is given from blue star


On Mon, Jul 22, 2024 at 7:42 PM MQSACK via groups.io <mqsack=gmail.com@groups.io> wrote:
Have you tried pulse IR?
 
Is that IR command a multi-mode code?
 
Do you have the source HEX code anywhere from Blue Star that you can try pasting in as opposed to learning it?
Re: TV Presets v2.0

 

Are you working in Simpl or CH?
 
I work in Simpl and use a Serial to Analog 16bit, take that analog value and feed it into a keypad decoder 12 module. Some other small logic after that, but the keypad module allows timing adjustments so that it doesn't miss digits (get 35 instead of 355) etc.
 
Jon
Re: Lutron QSX HVAC Module S+ Compile error

 

Resolved - had an outdated .clz - Jeff at CC flagged it
Re: Vogel’s Motorized TV mount IR codes

 

Did you try calling their NJ distributor?
TV Presets v2.0

 

I am using TV Presets Profile Manager v2.0, TV Presets CRPC Interface v2.0 and TV Presets Channel Control v1.0 and when sending out channel numbers to IR Driver I am getting duplicate Numbers on occasion of "0" or previous selections doesnt clear and will send a long channel string.
Ex: I select channel "1002" and get this "10002" or select "1223" and channel doesnt change so I select channel "1103" and get "12231103".
 
Has anyone else experience this?
Re: Question: Easy way to convert a Crestron Mobile to Crestron App project??

 

DM and we can check it out.
Nicolasfreda at
Hotmail

NFH

On 22 Jul 2024, at 9:32 a.m., mariusz via groups.io <mariusz@...> wrote:


I am looking for someone, that helps me (not for free) with converting my project. I don't have actual SIMPL and VTPro, but have converted VTPro project to Smart Graphics on my old VTPro, so now I need to add module in Simpl. Who can help me? :-)
Re: Question: Easy way to convert a Crestron Mobile to Crestron App project??

 

I am looking for someone, that helps me (not for free) with converting my project. I don't have actual SIMPL and VTPro, but have converted VTPro project to Smart Graphics on my old VTPro, so now I need to add module in Simpl. Who can help me? :-)
Vogel’s Motorized TV mount IR codes

 

Does anyone have infrared  codes for Vogel’s motorized tv mount.  on site and don’t have a ir learner with me.  Thanks for your help
Re: BLUE STAR CASSETTE AC IR Learn issue

 

Have you tried pulse IR?
 
Is that IR command a multi-mode code?
 
Do you have the source HEX code anywhere from Blue Star that you can try pasting in as opposed to learning it?
Lutron QSX HVAC Module S+ Compile error

 

Anyone know how to fix this syntax error? This S+ module fails to compile based on this line:
 
ThirdPartyHvacComponent component;
Module is: Lutron HomeWorks QSX Single SetPoint 3rd Party HVAC Control written by Control Concepts
 
Images here:
 
 
Matt
Re: Monitoring Systems (Like OVRC and Domotz)

 

OVRC has it's quirks, but if you put a Pro Hub on-site it usually gets the job done for me.
 
That said, I also usually have remote desktop and/or VPN access to all my sites as well.
Re: Timeout to Start Login page.

 

OK. I tried that, and it looks nice, but like my other previous attempts, I can't seem to tie it in to the right thing to make it go to the Start Page.
I even tied it to a hidden button w/ a Digital press # on the TP, but now they both say that they have no destination.
Like I said, it may be obvious to everyone but me, as I'm still pretty green.
Hint?
 
BLUE STAR CASSETTE AC IR Learn issue

 

 I am currently working on integrating a Blue Star cassette AC through IR in a boardroom for our client. I have learned the Blue Star AC remote model R11CG/E using the Crestron IR learner. However, I am encountering an issue: the off button works perfectly, but when pressing the on button, the operation and timer function lights blink, and the AC does not turn on.

For your information, I also tried the same IR file on a new model Blue Star split AC, and it works perfectly when pressing the button twice. Do you have any IR files for the Blue Star Cassette AC Remote R11CG/E?
Re: Monitoring Systems (Like OVRC and Domotz)

 
Змінено

Crestron has partnered with some software developer to provide an MDU property manager dashboard which can monitor all kinds of things with a pretty usable interface... I saw that a couple years ago at cedia, they are listed as one of the partner companies I forget the name offhand... But I was pushing my rep for a concrete answer as to why Crestron has not purchased the company and turned it into an integrator dashboard. It would be absolutely fantastic. I think everybody here should take a look and start screaming about it. I have no doubt that Crestron is absolutely all about Open integration and control of all electronic devices and it would only make sense that they would have their own monitoring platform for companies that build dozens or hundreds or thousands of systems that they need to manage. How would they not benefit from providing a monitoring platform... Which would effectively standardize the quality of the systems that they've got out there and how they're being managed effectively... 
 
If they added a couple of basic network tools to this, forget it, I would be all over it.
 
https://gobodhi.com/
Re: HD-MD8X2 questions

 

Sounds like an overscan issue; sounds like the switcher is presenting different EDID to the source than the TV directly is which you can usually fix either by copying the EDID from the sink (e.g. TV) in the DM setup tool (I think the HD-MD8X2 supports this) or changing the picture mode on the TV (1:1, fit, etc.)

 

From: crestron@groups.io <crestron@groups.io> On Behalf Of stefuel2 via groups.io
Sent: Sunday, July 21, 2024 5:39 PM
To: crestron@groups.io
Subject: Re: [crestron] HD-MD8X2 questions

 

I haven't really had time to play with this so I haven't got the programming right for it yet. But that's not the immediate problem.  I wanted to make sure it was actually working so I connected one source and one display so I could test all 8 inputs and 2 outputs.  I actually ended up with two of these switchers and both doing the same thing.  For the input, I'm using a PC set to 1080P 60.  Going to the monitor direct from the PC, it displays perfectly.  Passing the signal through the switcher is the problem.  How to discribe this hmmmm.  The image fills the screen but actually to big. If you were looking at a normal windows desktop and then put a strip of 3/4 inch tape on all four sides, that's what I see.
Re: HD-MD8X2 questions

 

I haven't really had time to play with this so I haven't got the programming right for it yet. But that's not the immediate problem.  I wanted to make sure it was actually working so I connected one source and one display so I could test all 8 inputs and 2 outputs.  I actually ended up with two of these switchers and both doing the same thing.  For the input, I'm using a PC set to 1080P 60.  Going to the monitor direct from the PC, it displays perfectly.  Passing the signal through the switcher is the problem.  How to discribe this hmmmm.  The image fills the screen but actually to big. If you were looking at a normal windows desktop and then put a strip of 3/4 inch tape on all four sides, that's what I see.
Re: Timeout to Start Login page.

 

Right-Click on the Touchpanel in the device symbol section of SMW, then select 'Insert Device Extender' , then Activity Detection...
Re: Timeout to Start Login page.

 

Activity extender huh?
I don’t remember seeing that, but I’ll check it out on Monday.
Thanks much.

Jim

On Jul 20, 2024, at 9:20 PM, Mark Lambert <mark@...> wrote:


add an activity extender on the panel.
Set it for 300s. This "activity" signal will remain high until the timer expires, but resets every time the panel is touched.
Attach the output of the activity signal to the reset of a one shot, and comment out the trigger. This will give you a pulse when the 5 minutes expires with no activity on the panel.
Use the pulse to do whatever logic you want.

I use that in every program. it leaves the settings page unlocked forever - as long as the user is interacting with it. Once they leave it alone for 5 minutes, the panel locks again.
Re: Timeout to Start Login page.

 

add an activity extender on the panel.
Set it for 300s. This "activity" signal will remain high until the timer expires, but resets every time the panel is touched.
Attach the output of the activity signal to the reset of a one shot, and comment out the trigger. This will give you a pulse when the 5 minutes expires with no activity on the panel.
Use the pulse to do whatever logic you want.

I use that in every program. it leaves the settings page unlocked forever - as long as the user is interacting with it. Once they leave it alone for 5 minutes, the panel locks again.
Re: Timeout to Start Login page.

 

It’s for a job.
Basically, I have a “Start Page” with a full page size button that takes you to the login.
It works fine, but once logged in and using the system, I want it to exit back to the login page after a set amount of inactivity.  A “time-out”, so to speak.

Jim

On Jul 20, 2024, at 7:57 PM, ckangis <chris@...> wrote:


Is this a specific Login page? or something that you're trying to develop for you/a client?
1 - 20 з 253979