Punch out the plastic and the pins to reduce the wear of the standards. <landrjoh@...> wrote:

I see, thanks! .. and do you know by any chance if there's a firmware or a way to modify the IFBW? I was mostly interested in the Ojisan firmware because of that. On Nanorfe website they show graphs w

No, 12k is IF used in measure. So not possible measure on this frequency or it harmonics PS in H4 possible change IF in config-expert settings menu

with the version screen cap

There are NanoVna V2s for higher frequencies.

I'd not have a waterfall on the VNA.. There are cases where you want to measure the variation in performance of device over temperature - but that would better be done by external software that *reads

Very informative, thank you for passing on the insight and summary from your friend. We are lucky to have such a functional device at the price point.

Fantastic, thanks for this. ​I hadn't updated the versions in recent months as I've been distracted from radio by work... very frustrating! The plus side is that this means the latest 1.1 version was

I took a closer look and there are more of these interferences. They are very narrowband. If the measuring point falls farther than the filter band, they are not there. It has nothing to do with the D

Thank you very much. Clayton Heilman Ke7ngo "The world is run by those who show up." Richard George Weingardt

OK well maybe it was the ribbon. Because it wasn't working with the battery. But now it is. I got it. She's fully working. The888store can get bent. Thank you for your help guys. I love this little to

Anne, You can discuss any issues you think are pertinent with other 'Saver users here to see if others are experiencing the same issues. Then, you can open a new issue on github. ...Larry

Kees, Personally, I am happy with the present scheme for the Reference Position. Regarding the red digit on the data entry line: More recent firmware versions seem to behave differently. Try some out

On Sat, May 2, 2020 at 05:54 AM, Gyula Molnar wrote: ... What you mean is a solution that already works in nanoVNA Saver. ... ====================================== Gyula, I believe Rob was requesting

Hugen Can I suggest you use the same values of R25 and R24 in the attenuator circuit for the CH1 input as those used in for the reference SA612? And then set R22 to come to 50 ohm? This will reduce th

Owen Duffy recently blogged about reinforcing nanoVNA SMA connectors by soldering a brass beam between them, which could compromise performance. https://owenduffy.net/blog/wp-content/uploads/2020/01/n

I wonder/hope that will there be a TDR in next VNA the 2.0. Delay gives a good starting point for cable compensation, (which people here will probably know better than I)I mean the one with upper freq

On Mon, Jan 13, 2020 at 03:07 PM, Leif M wrote: " I managed to update the firmware and with 0.54 version." - Great. That should give you access to the latest firmware features of your choosing and off

Hugen, I noticed on the new NanoVNA-H4.2 PCB there is an unpopulated silk-screened area labeled "CARD1". Does that imply that a SanDisk card is in the works for a future version of the NanoVNA-H4? Als

I just got my NanoVNA. Yep it's small. I didn't realize how small it was until I really stared at the pictures. At first I was wondering how difficult it was to read the display due to the size but I