Based on the serial number you can either create udev rules to distinguish similar devices as mentioned at https://groups.io/g/tinysa/topic/unique_serial_number_via_usb/106933651 or you just use the s

with the version screen cap

I'd not have a waterfall on the VNA.. There are cases where you want to measure the variation in performance of device over temperature - but that would better be done by external software that *reads

Fantastic, thanks for this. ​I hadn't updated the versions in recent months as I've been distracted from radio by work... very frustrating! The plus side is that this means the latest 1.1 version was

actually, search for "SD CARD SLOT"

Properly used it only links to other subjects with the same hashtag - it's superfluous in a group like this and should be constrained to twitter where the trendy junk originated from..

There are versions of V2 with N and SMA connectors. V2 switches to si5351 for frequencies below 140MHz so that is correct. yahoo.com@groups.io> wrote:

Thanks DiSlord! It is a very nice FW version.

RESISTANCE IN YOUR COAXIAL CABLE STUB Your antenna has R = 0 Ω. The R+jX (Ω) chart allows for positive and negative R values. 1) What is the significance of R = 0 Ω in your “antenna”; Is there an “RR-

If you just want to measure gain, it is totally fine to calibrate and measure with the attenuator at the port. The reflection measurement will probably be very noisy with 20dB attenuation and may not

Dear Shirley, Thankyou, I have been very busy and displaced from my electronics den for a year, but it is nice to know that what I saw using rtlsdr recievers was actually genuine narrowband signals. M