So I just received my G106 and it has F/W Version 1.2 Oct 10, 2022 SSB sounds like everyone else's and is acceptable. CW adds an extra dit? Anyone else have this? Does 1.3 solve this? de KG9H

I saw this video today. For those who are interested: it gives i.m.h.o. a good and honest 'very first impression' of the G106: https://www.youtube.com/watch?v=ZVcJhxinwy4

hello, anyone know of any digital hookup i can use instead of spending $70 or $80 for a de-9 digital matching unit? Any suggestions that have worked will be appreciated. 73 david ac9xh

Buenas tardes, tengo la versión instalada de fábrica (V1.2) el 10 de octubre de 2022 y quisiera actualizarla a la más reciente, ¿alguien podría ayudarme a conseguirlo?. ¿Necesito algún software especial o se puede intentar directamente desde un PC? Gracias

Hi all! Attached is a pdf file to modify the microphone for better modulation. Best 73, Amadeu, EA3OW

Just starting my HF journey, but chose the G106 as my first HF rig. Attracted to QRP. Especially digital Winlink e-mail with VARA HF. Got the DE-19 but haven't tried that yet. Local ham club does a weekly 10 meter net via groundwave, so I deployed my EFHW 40/20/10m sloper, and got 4 contacts - my first ever HF contacts! Very pleased to just deploy and succeed on the first try! On to digital! 73 Scott KO4SQK

Has anayone found out how to get the G106 working correctly with WINLINK Express/varahf. Set as an ICOM radio the PTT via CAT does not hold longer than 1 sec. This is an issue. Other digimodes like JS*Call via FLRIG work fine. robert

Has anyone measured the rf output of the G106 at different supply voltage levels? it is done for the x6100, there the full output is at 9 V already. Higher voltages just produce more heat.

Hello the group. For those who want to build a PTT interface to command an amplifier (or an other equipment) with the G106 without destroying its ACC interface... 😉👍 73 Jo - F5NFB

new owner here; picked up one from the s. american river last week... left an eham review w/my experiences... just crafted two rj9 headphone adapters... this will make life easier on my /p outings (had to use the speaker, which was OK, but with HC-130 aircraft flying overhead, park lawnmowers and grass blowers, cars, panhandlers, and curious passerby around in the local park, listening to faint sigs was difficult - although i did snag CO on my last outing from down here in the Near Tropics) i'm leaving the mic in the box as i will primarily use the rig for CW - it seems to work FB... rig arrived w/1.2, but a minute later was easily upgraded to 1.2... now if only Xiegu would enable MEM->VFO copy, this rig would be great... i get around this limitation by using the BSM menu setting (seems easier to QSY) my question: the documentation for the DE-19 shows an incorrect DB connector on the rear of the rig that does not match the actual connector on the rig! anyone have a link to a corrected or updated DE-19 sheet? tks, and 72, bill, kg4zqz

Today I spotted that there is a new review for the G106: see https://qrper.com/2023/06/an-in-depth-review-of-the-xiegu-g106-qrp-hf-transceiver/ Robert 73's

Latest firmware update for the Xiegu G106 was 1.2 build 03 (October 10, 2022). That is more than 7 months ago. Will new firmware be coming soon? PS for the G90 and X6100 more IV commands are added (essentially the same IV commands as used the IC-705). Will the G106 follow?