Does anyone know or have a Simpl Windows module for SENSIBO SKY?

Anyone seeing issues crop up recently with the weather app on x70 panels?? Of course, I know its a dumpster fire to begin with, but...It was working...

Has anyone come across the new Verizon Fios Stream TV boxes? I can’t tell from the pictures if it will accept an IR signal. Or maybe IP control.

Good day everyone. I am running into an issue with trying to set preset values for audio levels on an HD-PS402. In most cases, I have had three analog inits setup to handle system startup, power on and power off presets. This has not worked reliably for me with this switcher. On the advice of another who had a similar issue, I staggered the presets with a stepper. This has not worked reliably for me either. I am looking for ideas on how best to handle this. -Brian

Is anyone having issues with the new x70 series like edge light bleeding and calibration issues? I have 8 touch screens but unfortunately one of them is acting weird, the lower part of the screen doesn't respond to touch and it makes the keyboard unusable. There is no option to calibrate the panel as far as I can tell. Tried initialize, FW update and hard reset but nothing seems to work. Below is a demonstration : https://youtu.be/YHbe0vER4is?si=bqDKR7_7oRsJFisS

My Request Media Player was acting up so I was going to setup a spare one just in case it died. Turns out the spare one is missing the OS and I cant find the OS files to reimage the player. I went to the website and it looks like they are officially out of business when it comes to their residential products. Do any of you guys have an image of the OS that goes into the BluRay Media Player?

I am a little confused on how to set this up in the program (SIMPL). We have a DMPS3-300-C as the processor and switcher that we are going to use DM output 3 to connect to the Digital Link input on the projector. Would anyone have some screenshots on how they may have set this up in the program? From reading some of the post about this in the past I am still a little confused. Do I need to use a HDBT receiver definition on the DM 3 output and then also a roomview connected display (or TCP/IP) on the ethernet devices (using something like IP-ID 05)? Any help would be grateful as I rarely run into this type of situation. Rick Arnold

Hello, I have here my touchpanell TSW 770 B-S with firmware version 2.004.1079. I am able to sent my GUI project to the panel but everytime it reboots it enters crestron default mode. I cannot force it to enter user project application. As far as I know this is the latest firmware. Any ideas?

Has anyone had any luck using a different wifi adapter to enable Miracast functionality on an AM-200?

I have a D3Pro program with lots of Horizon keypads. Once I get the Behavior Properties "just right" on one keypad, it would be nice to simply copy those settings to other keypads. Does anyone know if that's possible, and if so, how to do it? Thanks in advance.

Hi All, Here's a weird issue that I've come across over the last week or so using my iPhone 14 (v17.3.1). While connected ONLY via the T-Mobile cell network (New England), known working VPNs will still connect to sites, but the Crestron App will not connect. The processor doesn't even see the IP-ID connections. If I'm remote (or local) on a Local network/wifi system, I can connect to remote sites normally... The main variable seems tp be T-Mobile. has anyone else seen this??

Hello, I have RMC4 as my control unit and TSW-770 B S as my touchpanel, I had added ip table with my RMC4 ip number on my touchscreen but it shows offline, on the control unit ip table shows that touchscreen is online. Port number is default 41794.On the Xpanel I am using ip number of RMC4 and IPID of a touchpanel that I selected in my program, everything works fine. What am I doing wrong that my touchscreen cannot communicate with RMC4?

I’m coding for one of these right now (awaiting actual unit), so this caught my attention. Have you logged into its web browser and configured it or checked its settings? See this article: https://docs.crestron.com/en-us/9227/Content/Topics/Configuration/Configuration.htm Please let us know if this helps. Jim

When I launch the X-Panel from the new VTP with the 'Play' button, it not only activates my laptop screen's task bar at the bottom (and it won't auto-hide anymore if I leave it on that local screen), but seems to be zoomed in, and is unusable. Does anyone know if it can be re-sized? I've tried all of its Menu items and am at a loss. Any help would be greatly appreciated, Jim

Hello, I'm coming from an AP3 system and just finished setting up Crestron home OS 4. I'm facing two major issues between the 2N and the TSW-1070: 1- Whenever a call is issued from 2N the touch screen will only display the outdoor camera with action buttons as long as the call is still ongoing so panel needs to keep ringing otherwise it's not possible to see who's outside 2- It seems that it's impossible to change the ringtone of the touch panel and I must admit I can't stand it. With the AP3 it was a bit more complicated but one a call is initiated a 3 seconds ringtone is enough to display the RTSP page with the action button until I open the door or reject. Also I was able to play any ringtone using http commands... All this seems impossible with OS4 or I'm missing something? Thanks.

Many smart home products are designed for people that live in single family homes as they require replacing existing things in the home or making other modifications to the property. Products like these can't be used by people living in rental properties. The SwitchBot Lock Pro is a smart lock that meets the needs of both people living in single family homes AND those living in rental properties. This article looks in detail, including hands on experience, with this new smart lock that works with an existing deadbolt lock. You can find the article here: https://restechtoday.com/installation-and-integration-of-a-switchbot-lock-pro/ For those interested in earlier articles that I've written, you can find those here: https://restechtoday.com/author/jaybasen/ For these interested in even earlier content that I wrote, you can find it all here though older content has formatting issues due to a transfer from blogspot to wordpress. https://topicsinhomeautomation.wordpress.com/ Thanks

i guess both work, is there a reason to use 1 or the other?

Having trouble sensing contact closure on a Pro3. As I recall, a CNMSX Pro worked out of the box. I think the Pro2 did as well. The ST-IO required a jumper move under the cover to switch from contact closure to reading voltage. Where and how do I tell this what it's looking at?

Hello, I am looking for a temperature sensor recommendations to read the rack temperature which can be connected to the IO port of the CP4. Thanks in advance. Jomy

Hello. I built my first project in construct, but the customer is unsure of what he wants so I want to create a new version with the date of today, just in case he changes his mind so I don't have to recreate all the stuff I deleted in the new version... Thing that we all do in any program with the "save as" function. How the hell do I do that? There's no "save as" option! Also, accessory question, I tried to find a way to "auto save" every 5 minutes like I do with VTPro but can't find the option. Some people (like me) still work with desktops and sh1t can happen. I took the habit of clicking "save all" every now and then but if I ever forget and the power goes, or the computer crashes, I'm screwed. I'm, trying to get used to this new software and the learning curve is not as steep as I thought anyway. Thanks for any insight.