I am currently working on integrating a Blue Star cassette AC through IR in a boardroom for our client. I have learned the Blue Star AC remote model R11CG/E using the Crestron IR learner. However, I am encountering an issue: the off button works perfectly, but when pressing the on button, the operation and timer function lights blink, and the AC does not turn on. For your information, I also tried the same IR file on a new model Blue Star split AC, and it works perfectly when pressing the button twice. Do you have any IR files for the Blue Star Cassette AC Remote R11CG/E?

I am using TV Presets Profile Manager v2.0, TV Presets CRPC Interface v2.0 and TV Presets Channel Control v1.0 and when sending out channel numbers to IR Driver I am getting duplicate Numbers on occasion of "0" or previous selections doesnt clear and will send a long channel string. Ex: I select channel "1002" and get this "10002" or select "1223" and channel doesnt change so I select channel "1103" and get "12231103". Has anyone else experience this?

Anyone know how to fix this syntax error? This S+ module fails to compile based on this line: ThirdPartyHvacComponent component; Module is: Lutron HomeWorks QSX Single SetPoint 3rd Party HVAC Control written by Control Concepts Images here: https://vayumetrics.egnyte.com/fl/v8LANzP7GK Matt

Does anyone have infrared codes for Vogel’s motorized tv mount. on site and don’t have a ir learner with me. Thanks for your help

Subject says it all! I have a client that needs to change an existing Crestron Mobile to the Crestron App. I tried doing a 'Save As' and VTPro rejected it...I get it... Any one have any tricks?? TIA!

Hi All, I have used network monitoring tools for ~10 years now, starting with iHiji. We are using Domotz now. Due to substantial $$ increases with Domotz (site pricing has gone from $16 to $35 in less than two years!!), we're open to options and wanted to see what others have found useful. iHiji was still the most integrated with Crestron until it was purchased by C4. Domotz has many of the best features that it had and does a better job in many ways, though it really lacks in Crestron integration. OVRC has never gone beyond really nice toy IMO, but it is free, so you get what you pay for... Ultimately I'm looking for a refined dashboard with alerts, integration within the app, ex: auto-relate POE ports with devices, provide remote control over those ports and also for PDU outlets for rebooting, etc and ultimately bi-directional integration with Crestron like we had with iHiji so processors and send alerts to the dashboard and info can come back to trigger things in the program... Any other systems out there that people are happy with?? TIA!

Being a newbie, I have to ask: can anyone steer me in the right direction on how to set a timer to drop out to the passworded login page? I can’t seem to figure this one put. jim

I'm hoping to use one of these in my sons apartment but having a little trouble wrapping my brain around setting it up. First question is, is there any benefit to connecting via Ethernet over cresnet? If I use cresnet, i only need a 10 inch long cable direct to the processor. There will only be 4 sources accessed by 2 TV's. (Living room and bed room). I don't need audio breakaway. I'm missing something here. Looking at it in program mode, I'm not seeing what initiates the input and which output you want to send it to.

It's been kind of random and I haven't really put in the time to pinpoint firmware versions between processors, but over the past month - two months i have been noticing quite a few failures to load, over and over until a reboot of the processor or other measures. Most loads have been over VPN with a solid connection, but when that fails, I will revert to an on site PC which mimics the problem. Latest software. Information tool comes up fine, able to open up the load program window which looks fine, select file and hit upload. Prompts that is sending but it basically freezes at this point and reverts back to no update being loaded. What's strange is, I can use the web GUI, stop the program, then load the program just fine. I am wondering if there is something suspicious going on with Toolbox in relation to enabling embedding archives to the processor. We've found it's just easier to load the archives to processors just in case, but I'm wondering if this is causing some of these lockups. Wondering if anyone else has been experiencing any weird issues like this lately.

Hi All, The Sonnex Tool in toolbox provides a lot of info about the SWAMP system, including if a signal (audio) is present on a source. I'm looking to use this info, but I don't see anything in the SMW/Device slots for this. Am I missing something or is there not a way to use this info? TIA!

As far as I know I have to use "SIPADDEXT 101 192.168.1.51 KITCHEN" command to add just 1 entry for the kitchen @ 192.168.1.51 address and with 101 extension. But I have 16 Touchpanels, so I have 15 entries I have to make for each touchpanel command line in that case... is there an easier way to make an address book for the TSW panels?

any examples of using S# that references a CLZ file to get data to use or to compare data with? Same concept in S+ that uses CLZ files but now how to convert to S#.

Does anyone know of a good led sensor. I am trying to get feedback from a gate entrance. It is older linear gate device and the only fb I see is an led light on the board that is illuminated when the gate is open. Would like to put an led sensor over it that has contact wire to send feedback to Crestron if gate is opened or closed. Thanks

@jbasen, Just received a Shelly H&T Gen 3 and realizing it may be different from a Shelly Plus H&T. Cannot seem to get any reporting of temp/humidity. I did set the URL actions, but still no data received in the module. Thoughts? Something else to try? Thanks, Jeffrey

Does anyone know of or have a module for SIMPL for control of a Honeywell Resideo T6 Pro Smart thermostat? Cheers, Michael . . .

Hi All. Is anyone knows if there is module for MX100 available. Thank you

YoLink is a smart home product line offered by YoSmart. YoLink devices provide up to 1/4 mile of range because of their use of LoRa wireless communications technology. My latest article looks at the new YoLink Hub 3, the advantages it offers, and the new features that will be added in an upcoming software update. You can find the article here: https://restechtoday.com/yolink-hub-3-enables-lora-long-range-wireless-communication/ For those interested in earlier articles that I've written, you can find those here: https://restechtoday.com/author/jaybasen/ For these interested in even earlier content that I wrote, you can find it all here though older content has formatting issues due to a transfer from blogspot to wordpress. https://topicsinhomeautomation.wordpress.com/ Thanks

Hello! Quick question to all of you, how are SWAMP amplifiers and expanders working with the latest version of Crestron Home? one of my clients is interested in upgrading to Crestron Home while keeping his existing SWAMP multi-room audio. Is there something I need to know before getting myself into this update? Thanks.

Looking for some insight on the following. Attempting to connect to a somfy UAI+ via IP using the posted v1.5 modules off marketplace. Unable to get the modules to connect whatsoever. UAI+ is accessible via it's web interface and I am able to telnet into it as well. Anyone else seen this?

Been asked to take a look at a client with a few systems that have issues – didn’t do the original programming – two of the rooms with DMPS3-4K-350-Cs have logs full of “CresStore: Redis connection error: The system tried to join to a directory on a joined drive” Which doesn’t make any sense given that the DMPSes are on isolated networks (so no drive mapping should be occurring at least in my understanding of the word) and not doing anything too exotic. Firwmare is a couple years old so going to bring them up to current to at least rule that out but anyone ever seen this before? -- Lincoln King-Cliby Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Diamond) ControlWorks Consulting, LLC Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100 | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070 | London: (+44) (0)20 4520 4600 Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer